
GE 1/2 HP Continuous Feed Garbage Disposal Model GFC530V
| 1/2 Horsepower Motor | |
| Extra-Large Capacity Continuous Feed Disposer | |
| Over 2,800 RPM Grinding Action | |
| Stainless Steel Jam Resistant, Dual Swivel Impellers | |
| EZ Mount Installation | |
| Sound Reduction Technology | |
| ColdRolled Carbon Steel Armature Shaft Material | |
| SplashGuard | |
| Wall Switch with Sink Stopper | |
| Manual Reset Overload Protector | |
| Dishwasher Drain Connector | |
| Stainless Steel Sink Flange | |
| Stainless Steel Turntable | |
| 2 Level Precutter |
| Unit Capacity: | Extra-Large |
| Motor Horsepower: | 1/2 HP |
| Mounting Type: | EZ Mount |
| Control Type: | Wall Switch |
| Feed Type: | Continuous |
| Impellers: | Dual Swivel; Jam Resistant; Stainless Steel |
| Armature Shaft Material: | Cold-Rolled Carbon Steel |
| 2 Level Precutter: | Yes |
| Drain Connector: | Yes |
| Drain Elbow: | Yes |
| Manual Reset Overload Protector: | Yes |
| Sink Stopper: | Yes |
| Splash Guard: | Non-Removable |
| Grinding Speed: | Over 2,800 RPM's |
| Turntable Material: | Stainless Steel |
| Quiet Package: | Sound Reduction Technology |
| Power Connection: | Direct Wire |
| Volts: | 120V |
| Hertz: | 60Hz |
| Amps: | 4.5A |
| Parts Warranty: | Limited 1-Year Entire Appliance |
| Labor Warranty: | Limited 1-Year Entire Appliance |
| Warranty Notes: | See Written Warranty For Full Details |
| Overall Width: | 7 3/4" |
| Overall Height: | 13 7/16" |
| Dishwasher Inlet Diameter: | 3/4" |
| Drain Outlet Diameter: | 1 1/2" |
| Net Weight: | 9 Lbs. |
| Approx. Shipping Weight: | 10 Lbs. |
| Brand: | GE |
| Model: | GFC530V |
| Width: | 7 3/4 Inch |
| Depth: | 7 3/4 Inch |
| Height: | 13 7/16 Inch |
| Sink Flange Size: | 1 1/2 Inch |
| Type: | Continuous Feed |
| Auto Reverse: | No |
| Horsepower (Hp): | 1/2 Hp |
| Power Connector: | Direct Wire |
| Grinding Speed (RPM): | 2,800 RPM |
| Amps: | 15 |
| Voltage: | 120 Volts |
| UPC: | 084691231561 |
| EAN: | 0084691231561 |
Locations
| Location: | DC-WH |
| Warehouse Location: | R06B |